dsinternational
DSI was established in 1928 in Australia, with a mature transmission of the overall solution, set research and development, manufacturing, sales and service in one.
Hybrid-AT P2
  • AT P2 Hybrid
    AT P2 Hybrid
  • M04 RWD-6AT
    M04 RWD-6AT
  • M05 FWD – 6AT
    M05 FWD – 6AT
  • M06 FWD – 6AT
    M06 FWD – 6AT

P2 applies hybrid technology integrated to the market-proven DSI 6AT with purely electric drive and hybrid modes.It gives people an entirely new driving exprience,while reducing fuel  consumption.Equipped with large,medium and small sizes for various application of vehicle.


Features of hybrid power products


1 Match the front drive or rear drive 6AT,adopt P2 parallel hybrid structure,and replace the torque converter with the electric motor;
2 Add clutch C0,torisional vibration damper or DMF(double mass flywheel);
3 Adopt a high efficiency & low inertia motor with driving range over 100km in pure electric driving mode,matching more models;
4 Witth plug-in charging,four-wheel drive power can be easily reached;
5 Maximum input torque of gearbox:575-600Nm;

The M04 which is the new generation longitudinal 6-speed automatic transmission, is suitable for 2WD and 4WD vehicles with a maximum engine torque of 470Nm, which possess closed-loop control, self-learning shifting strategy and integrated fault diagnosis function. Modular designing will be suitable for diverse models of vehicle.


Product parameters:

Match the maximum engine speed 6000rpm
Match the minimum engine speed 500rpm
Maximum speed 230kph
Torque matching ~360(G)/ ~470(D)Nm
Weight (oil bearing) <76kg
Transmission oil quantity 9.1L
Design life 300000 km
Normal operating temperature (90%) 90℃-100℃
Extreme operating temperature -40 ° C-145°C
Cooling pressure Max.5 bar
Main oil pressure 5-23 bar
Available trip stop 1-3, 3-1, 2-4, 4-2, 3-5, 5-3, 1-4, 4-1, 3-6, 6-3, 2-6, 6-2
Limp (home) mode gear 4档,倒档

The M05 adopts optimized main case design and improved oil circuit control to optimize the transmission efficiency of M05. It is available for an engine input torque 180~350Nm and speed up to 6800 rpm~ 500rpm. The new generation of solenoid valve is adopted in order to accurately improve the performance of the hydraulic system.


Product parameters:

Match the maximum engine speed 6,800 rpm 
Match the minimum engine speed 500rpm
Maximum speed 230kph
Torque matching 180,230,250,280,320,350Nm
Weight (oil bearing) <90kg
Transmission oil quantity 7.6L
Design life 300000 km
Normal operating temperature (90%) 90℃-100℃
Extreme operating temperature -40 ° C-145°C
Cooling pressure Max.5 bar
Main oil pressure 5-23 bar
Available trip stop 1-3, 3-1, 2-4, 4-2, 3-5, 5-3, 1-4, 4-1, 3-6, 6-3, 2-6, 6-2
Limp (home) mode gear 4档,倒档

The M06 is a front-wheel-driven six-speed automatic transmission developed by DSI with world-leading technology, which adopts the most mainstream and mature solution in the world on the overall product structure. It is able to match an engine that range of torque from 150-260Nm and displacement from 1.5L~2.0L, including sedans, SUVs, pickups and so on. The design life is 300,000km.


Product parameters:

Match the maximum engine speed 6,800 rpm 
Match the minimum engine speed 500rpm
Maximum speed 230kph
Torque matching 150-260NM
Weight (oil bearing) <83kg 
Transmission oil quantity 7.6L
Design life 300000 km
Normal operating temperature (90%) 90℃-100℃
Extreme operating temperature -40 ° C-145°C
Cooling pressure Max.5 bar
Main oil pressure 5-23 bar
Available trip stop 1-3, 3-1, 2-4, 4-2, 3-5, 5-3, 1-4, 4-1, 3-6, 6-3, 2-6, 6-2
Limp (home) mode gear 4档,倒档